M2-C Heat Recovery Dishwasher
Item No.
CSSC4602
The M2C is fitted with a Heat Recovery Condensor which uses exhaust air to heat incoming water and can clean up to 1000 plates per hour and on cold water supply. Comes with Watermark Certification and internal dish and rack accessories.
Description
Need a more efficient dishwasher? This Passthrough Dishwasher by Wash Tech is a fantastic choice. The M2C is fitted with a Heat Recovery Condensor which uses exhaust air to heat incoming water and can clean up to 1000 plates per hour and on cold water supply. Comes with Watermark Certification and internal dish and rack accessories.
Specifications:
• Heat Recovery Condensor preheats cold water supply
• Significant reduction of steam emitted
• Suitable for installation without a canopy in many situations – with good general dishroom ventilation.
• 2.6 litres per cycle cold water consumption
• Up to 1000 plates per hour
• Electronic controls with enhanced functionality
• Multi-cycle options – 1, 2 and 3-minute cycles with manual cycle mode, Ecopower, Soft Start and Self rinsing cycle
• Service diagnostics for error recognition
• Double filtration via scrap trays and separate wash inlet filter
• Dual chemical injectors and Drain pump fitted standard • Stainless steel upper & lower wash & rinse arms with removable cleaning caps
• 10kW electrical load reducible to 7kW
• 430mm door clearance
• Autostart on hood closure - anti-drip door edge channels water away from the operator
• Easy clean L-shaped tank with curved corners
• Stainless steel construction
• Assured final rinse - 316 stainless break tank & rinse booster
• QuickConnect - Water supply hose - Dual chemical injector lines - Drain pump outlet hose
• Corner or in-line installation
• Unique 595mm or 640mm bench gap installation option
• No commissioning required
• Watermark certified
• W 705mm x D 765mm x H 2040mm
• 12 months’ warranty
Includes:
• 2 x 6007028 - 500mm dish rack
• 1 x 6007029 - 500mm cup rack
• 2 x C660503 - cutlery containers
Specifications:
• Heat Recovery Condensor preheats cold water supply
• Significant reduction of steam emitted
• Suitable for installation without a canopy in many situations – with good general dishroom ventilation.
• 2.6 litres per cycle cold water consumption
• Up to 1000 plates per hour
• Electronic controls with enhanced functionality
• Multi-cycle options – 1, 2 and 3-minute cycles with manual cycle mode, Ecopower, Soft Start and Self rinsing cycle
• Service diagnostics for error recognition
• Double filtration via scrap trays and separate wash inlet filter
• Dual chemical injectors and Drain pump fitted standard • Stainless steel upper & lower wash & rinse arms with removable cleaning caps
• 10kW electrical load reducible to 7kW
• 430mm door clearance
• Autostart on hood closure - anti-drip door edge channels water away from the operator
• Easy clean L-shaped tank with curved corners
• Stainless steel construction
• Assured final rinse - 316 stainless break tank & rinse booster
• QuickConnect - Water supply hose - Dual chemical injector lines - Drain pump outlet hose
• Corner or in-line installation
• Unique 595mm or 640mm bench gap installation option
• No commissioning required
• Watermark certified
• W 705mm x D 765mm x H 2040mm
• 12 months’ warranty
Includes:
• 2 x 6007028 - 500mm dish rack
• 1 x 6007029 - 500mm cup rack
• 2 x C660503 - cutlery containers
Reviews (0)
There are no reviews yet.